BFCP/BFEZ type wind shutter is the feeding equipment of pneumatic conveying system. It has the characteristics of continuous or intermittent forced feeding of materials into the conveying pipe under positive pressure by air flow: it can be used as a feeder for positive pressure conveying system of flour, bran, starch, grain, feed, sugar, chemical products and plastic powder materials. Materials with high adhesion are not suitable for use. BFCP is side-to-side communication: channels are provided at the lower part of the bearing seats on the left and right sides to connect with the conveying pipes, U-shaped axial discharge grooves are provided at the lower part of the casing, materials can only go from the side, BFCZ is vertical communication: there are no channels at the bearing seats on the left and right sides, and the discharge ports at the lower part of the casing and
THFX cock reversing valve (two-way valve) is a device for switching materials in pneumatic conveying system. It enables the material in the pipeline to change the conveying direction in the flow state without interrupting the supply and stopping the gas supply, and sends the material to two selected locations. If the combination of several valves can be sent to many selected locations, so the operation is very convenient. It is widely used in flour, bran, starch, feed, sugar, chemical products and other powder materials positive and negative pressure conveying and low speed conveying pipe road to change the conveying direction, so that the material is sent to the selected location.
Japan's Nakajima Production Institute for more than 40 years of advanced technology; By using the spiral mode and mixing a small amount of air, the powder can be delivered in a fine pipeline by dense phase pressure, and the conveying end does not need dust treatment; There is no change in moisture content or temperature during the conveying process; No separation of mixed powder; Easy piping construction with small conveying pipe diameter; No leakage, environmental protection, energy saving; Widely used in food, medicine, chemical industry, metallurgy and other powder delivery.
Dadong company pneumatic conveying engineering provides customers with complete sets of engineering and technical services such as general contracting, process design, pipeline layout, equipment manufacturing, installation and commissioning. Advanced process technology, sophisticated equipment manufacturing and excellent automatic calculation ability can effectively ensure the stability of the material conveying process, ensure the maximum conveying capacity, and create greater value for you.